UDC 631.227
The object of this study is an auger dispenser that distributes dry, crumbly feed. The goal of this study is to develop an effective design and operating parameters for a dosing and mixing device to improve the accuracy of feeding concentrated feed to cows. The use of complex-designed dispensers increases labor and material costs for their repair and maintenance, as well as reduces their efficiency. The result of our research is analytical dependencies justifying the influence of the design and technological parameters of the screw mixer-dispenser on its technical and qualitative characteristics, as well as regression mathematical models optimizing the main parameters of the mixer-dispenser and its operating mode, which implements the dispensing of feed using a special device. experimental screw working body; calculated values of the design and operational parameters of the experimental dispenser-mixer. The scientific novelty is the study of analytical dependencies that substantiate the influence of the design and technological para-meters of the screw mixer-doser on its technical and qualitative characteristics. The obtained results and indicators on optimizing the dosing of feed material during the preparation of compound feed, in comparison with its continuous operation over time, have theoretical significance for thematic programs, research and development work on the preparation of feed mixtures.
design, screw-loop, dispersed feed, system, mixer-doser, optimization, mixing
1. Kravchenko, I.A. Faktory vliyayuschie na pogreshnost' dozirovaniya sypuchih materialov / I.A.Kravchenko, A.Yu.Ermolin // Izvestiya vysshih uchebnyh zavedeniy Severo – Kavkazskiy region. Seriya: Tehnicheskie nauki: 2005, № 2. – str. 113 – 117.
2. Krasnoschekova, T. A. Normy i raciony kormleniya sel'skohozyay-stvennyh zhivotnyh v usloviyah intensivnyh tehnologiy proizvodstva pro-dukcii zhivotnovodstva: Uchebnoe posobie dlya sel'skohozyaystvennyh vuzov T. A. Krasnoschekova [ i dr.]. – Blagoveschensk: Dal'GAU, 2011. – 118 s.
3. Lobanov, V. I. Razrabotka i obosnovanie parametrov vibracion-nogo dozatora sypuchih kormov / V. I. Lobanov. – Chelyabinsk, 2008. – 25 s.
4. Lyalin, E. A. Pogreshnost' dozirovaniya sypuchih materialov spi-ral'no – vintovym dozatorom / E.A.Lyalin, D.A. Krasnosel'skih, M.A. Trit-nev // Molodezhnaya nauka 2016 : Mat. Vseros. Nauchno – prakticheskoy konfe-rencii mol. uchen., aspirantov i studentov. – Perm': PGSHA, – str. 242 – 248.
5. Morozov, N.M. Napravleniya mehanizacii zhivotnovodstva v malyh formah hozyaystvovaniya / N.M.Morozov, A.N.Rasskazov // Vestnik Vserossiyskogo nauchno issledovatel'skogo instituta mehanizacii zhivotno-vodstva. – 2017, № 2 (26). – str. 133 – 138.
6. Mohnatkin, V.G. Vybor racional'nyh parametrov pitayuschego ustroystva ustanovki dlya prigotovleniya kormovyh smesey / V.G.Mohnatkin, A.S.Filinkov, P.N.Solonschikov // Traktory i sel'hozmashiny. – 1975, № 4. – str. 45 – 47.
7. Pahomov, V.I. Proektirovanie i raschet tehnologicheskih liniy podgotovki i razdachi kormosmesey differencirovannogo sostava mnogo-funkcional'nymi agregatami / V.I.Pahomov, M.A.Tischenko, S.V.Braginec. –Zernograd: GAU SKNIIMESH Rossel'hozakademii, 2013.–220 s.
8. Platonov, V.V. k voprosu dozirovannoy razdachi koncentri-rovannyh kormov krupno-go rogatogo skota / V.V.Platonov: Avtoref.dis. kand.tehn.nauk. – Saratov, 2005. 24 s.
9. Polivaev, O.I. Ispytanie sel'skohozyaystvennoy tehniki i ener-go-silovyh ustanovok / O.I. Polivaev, O.M. Kostikov. – Sankt – Peterburg: Lan', 2016. – 276 s.
10. Savinyh, P.A. Opredelenie racional'nyh parametrov smesitelya teoreticheskimi issledovaniyami vzaimodeystviya vintovoy poverhnosti shneka s materialom / P.A.Savinyh, A.V.Aleshkin, N.V.Trubanov. D.A.Zyrya-kov. // Tehnika i tehnologiya v zhivotnovodstve. – 2021. № 1 94). – str. 76- 84.
11. Sadov, V.V. Energosberegayuschie tehnologii pri proizvodstve kombikormov / V.V. Sadov // Agrarnaya nauka sel'skomu hozyaystvu: Sbornik statey IV Mezhdunarodnoy nauchn. – prakt. Konf. V 3 KN – Barnaul: Izd – vo AGAU, 2009. – kn. 1, s 291 – 294.
12. R.M Hajiyev, M.R.Huseynova, U.T.Taghiyev, G.B. Mammadov, G. Allahver-di¬yeva, (2024). The study of the efficiency evaluation of the ventilation system of the poultry house in the summer/EUREKA: Physics and Engineering, 5, https://doi.org/10.21303/2461-4262..002306 link_1 or link_2 https://journal.eu-jr.eu/engineering/issue/view/217
13. Mammadov, G., Seyidov, Z., Saidov, R., Hajiyev, R., Huseynova, M.,Taghiyev, U. (2025). Development of an electric milk pasteurizer for farming. Eastern-European Journal of Enterprise Technologies, 2 (11 (134)), 16-25. https://doi.org/10.15587/1729-4061.2025.327666
14. Taghiyev, U., Yusubova, U. (2024). Conservation Techniques in Agri-culture Under Climate Change. In: Çetin, Ö. (eds) Agriculture and Water Manage-ment Under Climate Change. SpringerBriefs in Earth System Sciences. Springer, Cham. https://doi.org/10.1007/978-3-031-74307-8_9.
15. Guliyev, S., Baghirov, B., Rzayeva, R., Aliyev, S., Verdiyev, B., Aska-rova, A., Hasanova, K., Taghiyev, U. (2025). Determination and justification of the opti-mal amount of ultrafine diamond graphite additive in Litol-24 oil in rolling bearings. EUREKA: Physics and Engineering, 3, 113–129. https://doi.org/10.21303/2461-4262. 2025.003793
16. Mammadov, G., Seyidov, Z., Saidov, R., Hajiyev, R., Huseynova, M., Ta-ghiyev, U. (2025). Development of an electric milk pasteurizer for farming. Eastern-European Journal of Enterprise Technologies, 2 (11 (134)), 16-25. https://doi.org/10. 15587/1729-4061.2025.327666
