Sample page

Rules of registration and publication of articles

The originality of the articles. Accepted for publication, appropriate scientific areas of the journal articles that the author has collected new original, previously unpublished results of scientific research, theoretical, practical (innovative) development, ready for use and is a topical (demand) at the present stage of scientific development, either representing the scientific and cognitive interest. The article needs to clearly present the current state of the problem, research method and the results obtained.

The use of more than 10% of another, previously published, his text is not recommended. The editors will not consider manuscripts submitted simultaneously to other journals, as well as works that are for the most part already been published in the form of an article or part of another work in any other printed publication or by electronic media.

All published materials undergo a compulsory scientific, stylistic and technical editing, in accordance with the requirements of WAC to the publication of scientific literature. Scientific review is carried out by members of the editorial Board and invited reviewers. Reviewers ‘ recommendations are the basis for the final decision on publication of the article.

Plagiarism(from the Latin. plagiatus – kidnapping) is expressed in illegal use under the name of another product or another’s ideas, and in the fragments of foreign borrowing works without specifying the source of borrowing, intentional appropriation of authorship.
Under the plagiarism is understood as verbatim copying and paraphrasing someone else’s text. The use of borrowing the text of another author, the link to the source. Plagiarism can be detected both at the stage of obtaining articles using computer-based methods, and at the stage of peer review. All suspected plagiarism carefully checked. In the case of confirmation of plagiarism or falsification of results, the article will be immediately rejected.

The editorial Board accepts for consideration articles, typed on the computer in Microsoft Word (font Times New Roman 14 1.5 line spacing; margins: left – 3 cm, right – 1,5 cm, top – 2cm, bottom – 2cm), printed on standard paper format (A4). Page numbering at the right edge of the bottom of the page. The text is aligned in width with a paragraph indentation.
The volume of article should not exceed 23 standard pages have bibliography is necessary.

The material in the article should be presented in a structured, if possible (at least in meaning, or font) the following sections: introduction; methods and methodology of the study; the experimental base, the course of the study; results and discussion; application of results; conclusions.

When typing you should avoid using non standard fonts (e.g., fonts, national languages, specialized fonts, formula, etc.). If this is not possible, you must provide in edition to file this font for correct playback of Your text.

All abbreviations in the text should be deciphered.

The article should be carefully read and signed by all authors.

The author must inform (necessarily) your name, surname, academic degree, academic title, honorary title, position, place of work, city (place in upper left corner before the title of the article) – in Russian and English languages.
In addition, each author must complete the author’s card (form attached): avtorcard

Title of the article should be worded clearly and specifically, and to fully correspond to its content. Title of the article feature in the center, gaining 14 font, bold, capital letters, dot in the end is not put – on Russian and English languages.
All of the tables in the article should be numbered (sequentially numbered), have titles, links to them in the text required.
The tables placed after the references in the text. Each table should be numbered, have a brief, corresponding to the content name. Graph titles (sidehead) and rows (cap) should be formulated concisely and accurately. The information presented in the table should be succinct, vivid, and clear to understand and respond to the content of that part of the article that it illustrates. The table uses common abbreviations and approved in the International system of units (GOST 8.417-81) units of physical and mathematical values. If you are using other system of units, this should be agreed separately.

The table is allowed to print 12 font through 1 interval.

Tables are performed by the standard means of Microsoft Word or imported from Excel (without any information).

All figures (charts, diagrams, graphs, pictures) in the article should be numbered (sequentially numbered), to have captions, reference in text required.
The figures come after the references in the text. Figures should be clear, multicolor (colors are bright and saturated) and is available for printing reproduction, made in the form, ensuring the clarity of all details. If the figures shown on the axes, you must specify their name and to designate a numeric value.

Formula to draw a clear and understandable way, revealing all lettering. For formulas and letter symbols to them in the text, you must use the equation editor of Microsoft Word with the default settings: font 16, font style normal (not italic, not bold).
Scanning formulas from other sources (books, magazines, etc.) is not allowed.

List of references (at least 6 sources) is mandatory. Placed at the end of the article (not in footnotes) in the order they are mentioned. The presence of references in the text should preferably be numbered references are given in the text in square brackets in normal text format).
The list is made in accordance with GOST 7.1-2003 “Bibliographic record. Citation. General requirements and rules” and GOST R 7.0.5-2008 “Bibliographic reference. General requirements and rules of making”.

A link to each source is given in the language in which it is published.

The presence of abstract, key words, or combinations and UDC to publish necessarily.
Abstract (Summary) – font size 14, 1.5 line spacing, 1-3 sentences, no less than 10 lines in Russian and English languages.

Key words or combinations (Keywods) – font size 14, 1.5 line spacing, 1-3 lines, no more than 8 words in Russian and English languages.

Authors draw attention to the need to provide high quality professional English translation of abstract and keywords. Automated translation using software systems is strictly prohibited!

UDC (Universal decimal classification) is an international system of classification of documents covering all spheres of human knowledge used for the organization of informational databases. The technique of indexing in the UDC system is a set of methods and rules to construct an index of concepts the content of a certain document. Get advice on working with the UDC classifier and definition of code works in a standard library. Necessary information is also available on the Internet.

The structure of the article:

  • UDC
  • Author (authors) in Russian language
  • Author (authors) in English
  • The name in Russian
  • The name in English
  • Abstract in Russian (no less than 10 lines)
  • Abstract in English
  • Key words (4-8 words or combinations)
  • Key words in English
  • The text includes illustrative material (tables, figures)
  • Literature (at least 6 sources)

The article must attach supporting documents: a letter of recommendation, review and the author’s card.

A recommendation letter is written in any form, issued on the letterhead of the academic institution which employs or undertakes research, the author signs it the rector (Director), Vice-rector for research (Deputy Director), head of Department (head of Department) or the research supervisor. The basis for letters of recommendation can be the minutes of the faculty meeting of the academic Council of the faculty, the decision of the rector or Vice-rector with the appropriate signature.

The review is written by a doctor or candidate of Sciences in researches of the author. The review substantiates the novelty and relevance of the article, logic of presentation, the scientific validity of findings and conclusions includes the recommendation of the reviewer in relation to the article.

The review should be signed by the reviewer indicating his academic degree, rank and position, as well as certified by the stamp and signature of the head of the personnel Department of the institution, contain the date of its signing.

The purpose of a scientific publication is a contribution to science. The value of this contribution is determined by the reviewer. The publication of questionable data discreditied not only the author but also the entire scientific community and science in General. If you are in doubt of the validity of the content of the article, the reviewer needs to say it in the review.

Providing articles to the editor:

Article + scanned accompanying documents author (s) sends to the email address of the joint editorial

Reference on receipt of articles to the editors and their promotion you can get the email address of the editorial office and by phone:(499)261-63-91; (495) 543-65-62, (985)983-41-64 .

In the process of preparation of manuscripts all correspondence with the authors, the editorial staff is only by email.

The procedure for the adoption and promotion of the article:

Getting a version of the article (+supporting documents), read it, review and message to the author (within 1-2 days) on the decision of the editorial Board for its publication.